Opens in a new tab

Whole-Home Renovations

Whole-Home Renovations in Atlanta

Some houses need a room fixed. Some need the whole plan rethought. When you find yourself listing five projects that all depend on each other, you are not planning five projects. You are planning one.

What we do

A whole-home renovation means taking a house apart down to what is worth keeping and rebuilding the rest around the way you live now. Sometimes that is cosmetic across every room. More often it is structural: walls come out, ceilings go up, the kitchen moves, a stair gets relocated, and the mechanical systems get replaced because they are forty years old and you will never have better access to them than right now.

This is the work we are known for. Our Ranch Conversion project in Buckhead is a good example of what it looks like at full scale. The existing main level came down to the studs and was rebuilt from scratch, with ceilings raised from eight feet to ten feet in the process, while a two-story addition doubled the square footage.

Whole-home work is also the most financially efficient way to do a lot of things at once. You pay for one mobilization, one permit process, one schedule, and one round of dust. Doing a kitchen this year, baths next year, and floors the year after costs more in total and takes far longer in aggregate.

What a whole-home renovation usually includes

Scope varies enormously, but most of ours include some combination of the following.

Typical duration: whole-home renovations generally run 6 to 12 months of construction, depending on square footage and how much structural work is involved.

  • Floor plan changes. Removing walls, relocating the kitchen, adding a mudroom, reconfiguring the primary suite, and fixing the stair.
  • Ceiling height. Raising ceilings where the structure allows, which changes how a house feels more than almost anything else you can do.
  • Kitchen and all bathrooms. Usually the anchor of the project.
  • Mechanical, electrical, and plumbing. New HVAC, new panel and service, new supply and waste lines. Boring, invisible, and the single best money you will spend in an older house.
  • Insulation and air sealing. Only possible at this scale, and the reason the house is comfortable afterward.
  • Windows and exterior. Siding, trim, roofing, and windows, replaced or restored.
  • Flooring, millwork, and trim run continuously through the house so it reads as one project rather than several.
  • Built-ins and custom cabinetry detailed to match the age and character of the house.

How it works

Whole-home projects follow the same six steps, but the front half matters more. Discovery & Design is where the money is made or lost, because on a project this size a floor plan decision costs nothing on paper and a fortune in the field.

Pricing starts early and stays visible. You get a ballpark built from cost data as design takes shape, so you can shape scope while changes are still free. When you are ready, our trade partners walk the house and price the work in detail, and it becomes a line-item fixed-price proposal. If the number lands above your budget, we value-engineer it with you rather than handing you a smaller number with less inside it.

Why homeowners hire us for whole-home work

Scale does not change the fundamentals.

Same fixed price, same schedule discipline, same weekly communication, same warranty as a single bathroom. It is just a bigger version of the same process.

Line-item pricing you can steer with.

On a project with hundreds of decisions, one lump-sum number is useless. Ours breaks down so you can see what each part costs, weigh it against everything else, and decide where to spend and where to pull back.

We work on old houses without erasing them.

Some clients want a house that reads as modern. Some want the character kept and the systems fixed. Our Charming Bungalow project in Morningside is what the second one looks like: better flow and more light, with an arched opening and built-ins detailed to read as original to the house.

Three-year workmanship warranty

On a project where the number of things that could need attention is highest.

Whole-home renovation FAQ

Do I have to move out for a whole-home renovation?

Usually yes, for at least part of it. If the kitchen and all bathrooms are out at the same time, the house is not livable. We will map out the phases during planning and tell you exactly how long you need to be somewhere else so you can plan a lease or a stay rather than guessing.

Can we phase the work to spread out the cost?

Sometimes, and we will lay out what phasing would look like. Be aware that phasing costs more in total, because you pay to mobilize, permit, protect, and clean up more than once. It also extends how long you live in a construction zone. It can still be the right call if the alternative is not doing the project.

How do payments work?

We bill weekly, based on the work actually completed. There is no large upfront check. On a project of this length, that structure keeps everyone honest and keeps you in control.

What if we find something unexpected once the walls are open?

On a house this old, we will find something. Old wiring, failed cast iron, water damage, framing that was never up to the job. Our process is to stop, document, show you photographs of exactly what we found, price the options, and get your approval before proceeding. No surprises, no finger-pointing.

Can you work with our architect?

Yes. That is our “You Bring the Design” option. We build to their drawings and coordinate with them directly through construction.

Ready to rethink the whole house?

Start with a twenty-minute conversation. We will talk through what you want, what is realistic, and roughly what it takes. No cost, no obligation.